If you own a pool, then you already know how important it is to have the right flow of water into and out of your pool to keep it clean and healthy. One of the essential steps in this process is using a pool skimmer that prevents debris from sinking to the bottom. You may also have to pull the skimmer plug at times to ensure that your pool filter works well or to set up a robot-type pool cleaner to perform automated pool cleaning.
In this blog post, we will outline the steps to remove a pool skimmer plug and why you need to do it to properly maintain your pool. We’ll suggest how a pool vacuum robot, such as the Beatbot AquaSense, can do its part to keep your pool clean once the skimmer plug has been removed.
It Is Time for You to Remove the Skimmer Plug
Before going through the steps of removal, it is important to know the purpose of the skimmer plug and the reason it must be removed. This is when the pool skimmer plug is usually placed into the skimmer, which prevents the water from coming into the skimmer when the pool is winterized all so the water doesn’t freeze and do damage. During warm months or when the robot pool cleaner is being utilized, the plug must be removed to let the water down into the skimmer and filtration unit.
How to Know When to Remove a Pool Skimmer Plug:
The Skimmer: Not Gravy For Your Cleaner Vacuum for Pool Before Setting It You’d need to remove the skimmer plug so that your pool vacuum filter works.
For Regular Cleaning of the Swimming Pool, when you are getting the pool ready for frequent cleaning, make sure to take off the plug because you will need the skimmer to work for this purpose and you might also be using a pool cleaning robot such as Beatbot AquaSense Pro.
How To Remove A Pool Skimmer Plug？
Now, here is a step-by-step guide to removing the skimmer plug and ensuring your pool is ready for optimal performance:
Step 1: Find the Skimmer Plug
Usually, the skimmer plug is located at the bottom of the skimmer basket. Usually, it’s a plastic seal that closes the hole. Be sure to turn off the pool pump in order to prevent any problems when taking out the plug.
Step 2: Power Down Pool Equipment
Before removing the plug itself, always disconnect the robot pool cleaner or any other pool equipment. This prevents debris from getting into the system as you work on it.
Step 3: Take Out the Skimmer Basket
The next step is to remove the skimmer basket. It will give you full access to the plug. (If it has gotten stuck, you might have to pull up slowly or wiggle the basket to remove it.)
Step 4: Take Out The Skimmer Plug
After the basket is out, you should be able to see the plug in the skimmer’s main body. Want to get it out? Just yank or turn it counterclockwise (depending on the variety of plugs). Some plugs might need to be pressed into the nozzle, but exercise caution to avoid damaging the skimmer’s opening.
Step 5: Check for Debris
Before replacing the skimmer basket, inspect the opening for debris or buildup that may inhibit water flow through it. This means that your pool vacuum robot or swimming pool robot cleaner will keep working without interruptions.
Step 6: Reinstall the Skimmer Basket
Reinstall the skimmer basket after removing the plug. Ensure that it is mounted tightly, as you do not want anything to bypass the filter.
Take the following steps with a robot pool cleaner after your skimmer plug is removed.
You can leave it to your robot pool cleaner to take over once you’ve removed the skimmer plug and restored proper water flow. A robotic pool cleaner such as the Beatbot iSkim Ultra or Beatbot AquaSense will ensure a clean pool before you even have to lift a finger. These automatic robotic pool cleaners can scrub the floors, walls, and waterline of your pool with ease.
Once you remove the skimmer plug, the water flow is optimized and the pool vacuum robot will perform better to collect dirt, debris, and even very fine particles. A pool robotic pool cleaner can assist in keeping pools clean whether they are residential pools or big commercial pools, so you need not clean regularly.
How To Regularly Maintain Your Pool Skimmer？
The pool skimmer must be maintained regularly, as this helps keep your pool’s filtration system functional. The skimmer when working properly can help out the robot pool cleaner and vacuum cleaner for pool work. A poorly functioning skimmer will result in clogs of debris, preventing your automatic pool cleaner robot from performing properly.
Moreover, cleaning your skimmer and taking out the plug when needed can prevent problems with the skimmer’s functioning, thus minimizing the possibility of costly repair.
Final Thought: Leave the Skimmer Plug Out to Make Your Pool Efficient
One of the most important steps to preparing your pool for proper filtration and cleaning is removing the skimmer plug. By using the simple steps above, you’ll keep your robot pool cleaner working efficiently and your pool shining clean. After that, remove the skimmer plug and let your pool vacuum robot or swimming pool robot cleaner do its work.
For better pool cleaning performance, you wanna invest in a solid, quality robot pool cleaner by getting a Beatbot model such as the Beatbot AquaSense Pro or Beatbot iSkim Ultra!
